Vision Installation & Water Care Procedures: Start up:


1. Fill Hot Tub let it heat up.
2. Add 3oz of Sequestrant or Stain and Scale control run jets 30 mins.
3. Alkalinity test adjust as needed 80-120 ppm if adjusted run jets 30 mins.
4. pH test adjust as needed 7.2-7.8 if adjusted run jets 30 mins.
5. You can use the spa but wait 48 hours for the next step.
6. Add 1 oz of chlorine.
7. Add Vision Cartridge run jets 30 mins
8. Enjoy your spa.

After Each Use:
1. Add 1-2 oz of the spa shock or enhanced shock.

Weekly:
1. This step is only needed if your spa does NOT have an ozone water management system.
2. Add 1-2 oz of chlorine run jets 30 mins.

Every 6 Months (4 months with Nature 2):
1. Drain refill spa
2. Go to Start up procedures

As Needed:
1. if water ever looks hazy or cloudy add 1-2 oz of chlorine run jets 30 mins.